Ny Cheva smallblock 350 motor i låda.
Inköpt 2014-10.29 och har stått ouppackad varmt till sedan dax datum då vi endast öppnat för fotografering.
Fyrbultat block.
Vortectoppar.
HEI-fördelare.
Komplett med allt utom grenrör / headers.
333 hp enligt info.
Objektet står i Skellefteå men EJ i PS lokal just nu. Efter auktionen så kan vi ordna frakt om köparen vill ha hjälp med det.
Fraktmått.
Bredd: 80
Längd: 138
Höjd: 115
Uppskattad vikt: 315 kg
Information som följde med vid köpet
350 HO Turn-Key TECH SPECS:
Block Part Number: 19210009
Block Type: Cast iron with 4-bolt main caps
Bore x stroke (in): 4.00 x 3.48
Camshaft duration
(@.050 in): 212 degree intake / 222 degree exhaust
Camshaft lift (in): .435 intake / .460 exhaust
Camshaft Part
Number: 24502476
Camshaft type: Hydraulic flat tappet
Compression ratio: 9.0:1
Connecting Rod Part
Number: 10108688
Connecting rods Type: Powdered metal steel
Crankshaft Part
Number: 14088526
Crankshaft Type: Nodular iron
Cylinder head Part
Number: 12558060
Cylinder head Type: Vortec iron; 64 cc chambers
Displacement (cu in): 350
Engine Name: 350 HO:
Engine type: Chevy small-block V-8
Flexplate Size: 14"
Ignition timing: 32 degree total @ 4,000 rpm
Maximum rpm: 5,500
Balancing: External
NOTE: Distributor with melonized steel gear MUST be used with long blocks and partial engines with steel camshafts, or engine damage will occur.
Piston Part Number: 12514101
Pistons Type: Cast aluminum
Recommended fuel: 92 octane
Rocker arm ratio: 1.5:1
Rocker arms Part
Number: 10089648
Rocker arms Type: Stamped steel
Valve size (in): 1.94 intake / 1.50 exhaust
Water Pump Part
Number: 88894341
Water pump Type: Cast iron, long-style
Chevrolet Performance 350 HO Turnkey Long Block Crate Engines
Chevrolet Performance introduces their entry-level performance turnkey long block crate engines in the form of these 350 c.i.d. HO assemblies with approximately 9.0:1 compression, 333 hp at 5,100 rpm, and 381 lbs.-ft. of torque at 3,700 rpm. Dressed to impress with a chrome front timing cover and valve covers, this engine will look great between the fenders of your favorite street rod, muscle car, or grass roots racer. The 350 HO engines are not intended for marine use and should only be installed in 1979 and earlier pre-emissions street vehicles, or any year of off-road vehicles. Parts used in these long block crate engines include 4-bolt main one-piece rear main seal blocks, nodular cast iron crankshafts, powdered metal connecting rods, and dished cast aluminum pistons. Installed camshafts are hydraulic flat tappets with a .435 in. intake lift and a .460 in. exhaust lift, with 212 degree open duration intake and 222 degree open duration exhaust lobes, at .050 in. ground with a 112.5 lobe centerline. Standard Morse link timing chains are also installed. Cylinder heads are Vortec cast iron style with 64cc chambers and 170cc intake runners with 1.94 in. intake valves and 1.50 in. exhaust valves. Stamped steel self-aligning rocker arms are used for reliability. Also included in the turnkey packages are:
* Holley carburetor with electric choke * Chrome air cleaner assembly * ACDelco spark plugs * HEI distributor * Chevrolet Performance Parts red spiral core spark plug wires * Long water pump * 8 in. harmonic balancer * 12 3/4 in. flexplate for automatic transmission * Oil filter and adapter * PCV valve * PCV hose * Oil dipstick and tube * Fuel pump * Starter
